Call us 866-836-8692

  • 200B / LF200B

    200B / LF200B

    Ames 200B is a double check assembly. Production began in 2003. The Ames 200B is the same as the Watts 719. For repair information see Watts 719. The body is made of bronze with a poppet style check. Check covers unscrew from the top of the body. The spring of the Ames 200B is not contained when the covers are removed.

    Repair Parts are the same as the Watts LF719 click here to view!

  • 2000B / LF2000B

    2000B / LF2000B

    The Ames 2000B is a double check assembly. In 1997 the Ames Company was purchased by Watts Regulator Company. Ames began to market the Watts 007 series as their model 2000B. See the Watts 007 information for repair info.

    Repair Parts are the same as the Watts LF007 click here to view!

  • 2000SS (Small Diameter)

    2000SS (Small Diameter)

    Ames model 2000SS were available in sizes 3/4"-2". They were made from 1990 and discontinued in 1997. They were stainless steel body.

     

    This model is currenlty obsolete! Some parts do remain, please call for availability:

    Chicago Office: (866) 836-8692

    Dallas Office: (866) 562-7740

    Detroit Office: (844) 727-8742

    Indianapolis Office: (877) 353-4386

    Denver Office (844) 622-0186

  • C200 / C200N

    C200 / C200N

    The Ames C200 and Ames C300 are double check valve assemblies. Originally produced under the Hunter name from 2000-2002. In 2002 Watts bought the Hunter models and began producing them as the Ames C200 and C200A. Watts also produces these models under the Watts name as the model 757 or 757A. The "C" designation refers to Ames Colt brand name. The body is stainless steel tubing. To access the check components a sleeve is mounted over the access cover. On the 2 1/2"-6" sizes the sleeve slides over the body to access the check components. On the 8"-10" sizes the sleeve is attached by two grooved couplings. The checks are modular and constructed of Noryl plastic. The check utilizes a torsion spring which is contained when the check module is removed from the body. The check spring must be extended and controlled with a pin or screw driver to replace the check disc. The check disc is either an EPDM or silicone. The model Ames C200 and Ames C200A will have the same external dimensions. The "A" model was discontinued in 2008 and utilizes a bi-link check mechanism while the "non A" version utilizes a tri-link check mechanism. The body length may vary and could be 1" shorter than shown in the dimension chart on versions produced earlier than 2003.

    Repair Parts are the same as Watts 757 click here to view!


  • M200 / M200N / M200Na

    M200 / M200N / M200Na

    The Ames M200 and Ames M300 are double check valve assemblies. This model was produced under the Hunter name from 2000-2002. In 2002 Watts bought the Hunter models and began producing them as the Ames M200 and M200A. The "M" designation refers to Ames Maxim brand name. The body is stainless steel tubing. To access the check components a sleeve is mounted over the access cover. On the 6"-10" sizes the sleeve is attached by two grooved couplings. The checks are modular and constructed of Noryl plastic. The check HAS a torsion spring which is contained when the check module is removed from the body. The check spring must be extended and controlled with a pin or screwdriver to replace the check disc. The check disc is either an EPDM or silicone. The "A" model was discontinued in 2008 and has a bi-link check mechanism while the "non-A" version utilizes a tri-link check mechanism. The body length dimensions may 1" shorter than shown in the dimension chart on versions produced in 2003 or earlier.

  • 2000SE

    2000SE

    The Ames 2000SE and 3000SE are double check valve assemblies. Production began in 1990. The body is fabricated stainless steel. Single top mounted cover. All have a modular check design. The 3/4"-2" from 1990-1992, had internal check mechanisms that were modular and made of a glass filled Noryl. The older assemblies have ball valve shutoffs that were built into the body. In 1992 external ball valves that screw onto the body of the assembly were added. In 1992 the check module working mechanism design was changed to a pivot design. 3/4" - 2" discontinued in 1997. The 2 1/2 - 12" check mechanism is made of a glass filled Noryl. The checks are modular. The check design is a cam operated mechanism. 2 1/2" - 10" sizes the check modules are not repairable and the whole check module must be replaced. For the 2000 SE design in the 2 1/", 6", and 8" sizes. The SE uses internal parts one size smaller than the pip size: 8" 2000 SE has 6" check modules, a 6" 2000 SE would contain 4" check modules. Be sure which version you have. The 2 1/2" SE was discontinued in 2003. The 6" and 8" SE models were discontinued in 2006.

    This series is currently Obsolete!  

     

     


  • 2000SS

    2000SS

    The Ames 2000SS backflow preventer model is a double check assembly. Production began in 1990. The body is fabricated stainless steel. Single top mounted cover. All have a modular check design. The 3/4"-2" from 1990-1992, had internal check mechanisms that were modular and made of a glass filled Noryl. The older assemblies have ball valve shutoffs that were built into the body. In 1992 external ball valves that screw onto the body of the assembly were added. In 1992 the check module working mechanism design was changed to a pivot design. 3/4" - 2" discontinued in 1997. The 2 1/2 - 12" check mechanism is made of a glass filled Noryl. The checks are modular. The check design is a cam operated mechanism. 2 1/2" - 10" sizes the check modules are not repairable and the whole check module must be replaced. For the 2000 SE design in the 2 1/", 6", and 8" sizes. The SE uses internal parts one size smaller than the pip size: 8" 2000 SE has 6" check modules, a 6" 2000 SE would contain 4" check modules. Be sure which version you have. The 2 1/2" SE was discontinued in 2003. The 6" and 8" SE models were discontinued in 2006.

    Repair Parts are the same as Watts 774 click here to view!

    <div class=”links”>

  • 2000B-FP

    2000B-FP

    Ames Series 2000B-FP Double Check Valve Assemblies with Gear Operated Slow Close Isolation Valves prevent the backflow of contaminated water into the potable water supply. It consists of a bronze body construction that is easy to maintain and service. Series 2000B-FP is ideal at referenced cross-connections identified as non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi

     

  • 2001SS

    2001SS

    Ames 2001SS and Ames 3001SS are double check valve assemblies. Discontinued in 2003. In 1997 the Ames Company was purchased by the Watts Regulator Company. Ames began marketing the Watts 775 as the Ames 2001 SS. For repair information see the Watts model 775 info. In the 3"-8" sizes there is a 2001 SSN model. This unit comes with two 90 degree elbows mounted between the backflow preventer flange and gate valve flange.

    This model is currenlty obsolete! Some parts do remain, please call for availability:

    Chicago Office: (866) 836-8692

    Dallas Office: (866) 562-7740

    Detroit Office: (844) 727-8742

    Indianapolis Office: (877) 353-4386

    Denver Office: (844) 622-0186


  • 2000CIV

    2000CIV

    Ames 2000CIV and 3000CIV are double check detector assemblies. Discontinued in 2007. In 1997 the Ames Company was purchased by Watts Regulator Company. Ames began marketing the Watts 709DCDA series as the Ames 3000CIV. For repair information see the Watts 709DCDA info. Double check assembly. Discontinued in 2007. In 1997 the Ames Company was purchased by Watts Regulator Company. Ames began marketing the Watts 709 series in 2 1/2"-10" as the Ames 2000CIV.

    For repair information see Watts model 709 info by clicking here!

    This series is currently Obsolete!

  • 2000DCA

    2000DCA

    Ames 2000DCA and Ames 3000DCDA are double check assemblies. The 4" and 6" were discontinued in 1995. The 8” was discontinued in 1998. The 10" was discontinued in 2002. The body is welded steel and either galvanized or fused epoxy coating. It is a one piece body except 10" which is a two piece body. Checks are contained when the cover is removed. A special tool is needed to release the spring tension. The internal checks are stainless steel with a bronze check seat. The checks are a vulcanized clapper plate instead of a rubber disc. The check is a knuckle joint assembly. The 4"-8" sizes use a side mount check design which requires the retainer clip tool. The 10" is a tower mount design which requires the tong tool for repair. The bronze check seats are replaceable. Seat removal tool is needed to replace them.

    This model is currenlty obsolete! Some parts do remain, please call for availability:

    Chicago Office: (866) 836-8692

    Dallas Office: (866) 562-7740

    Detroit Office: (844) 727-8742

    Indianapolis Office: (877) 353-4386

    Denver Office (844) 622-0186

  • 2000DC

    2000DC

    This model is currenlty obsolete! Some parts do remain, please call for availability:

    Chicago Office: (866) 836-8692

    Dallas Office: (866) 562-7740

    Detroit Office: (844) 727-8742

    Indianapolis Office: (877) 353-4386

    Denver Office (844) 622-0186